2.75 X 2.75 inches Iron-on Patch (You can also stitch the patch on)
Please follow our comprehensive step-by-step guide below for applying our iron-on patches.
IRON-ON EMBROIDERED PATCH INSTRUCTIONS
*for best results, wash your garment before application1. Set iron to medium-high heat.
Wait a couple of minutes, let the iron get nice and hot.
2. Lay garment on hard surface.
By surface, we mean a heat-tolerant surface such as a sturdy table, wooden cutting board, or Mom’s granite countertops. Padded ironing boards will get wrinkles out of your shirt, but won’t work well to adhere your new patch.
3. Place patch face up wherever you’d like.
We’re almost certain you had an idea of where your Black Wall Street patch was going to be placed before it arrived.
4. Cover with a piece of fabric.
Use a single layer of fabric, such as a press cloth or cotton bandana. This is to avoid scorching your Black Wall Street patch. We’ve seen this happen, please don’t skip this step.
5. Apply firm pressure straight down with heated iron for about 45 seconds.
Be sure to apply constant pressure. We know your mind-brain is telling you to iron out the wrinkles, but do not move the iron side-to-side like you normally would. Allow it to cool a little before the next step.
6. Turn the garment inside out and iron the back of the patch for 30 seconds.
No need to cover this side with a piece of fabric. Be sure and apply constant pressure once again.
7. Gently check if backing is adhered to garment. Let garment cool and enjoy your patch!
Allowing the patch time to cool will help set the heatseal backing onto your garment. Simply repeat steps 4-6 if necessary.
__
Wait 48 hours before washing, and turn garment inside out when doing so.
